Restrictions
About Simulation
Accuracy of simulation results
- This demo application intends to provide a technological introduction/experience. All data used for simulation is dummy data, and does not guarantee the accuracy of the results.
Simulation execution
-
This demo application is provided on the cloud and has a limit on the number of simulations it can run simultaneously.
-
When in use by a large number of users, some simulations may enter a standby state. In this instance, please review the results after the pause.
-
If a simulation takes more than 60 minutes, it will be aborted. The wait time before the start of the simulation is not counted.
-
If the OD origin or destination and the station or parking location are too far from the main road, the route search may fail and not be used in the simulation.
About Data
Recommended Data Size
- The recommended values for the data created by this demo application are as follows. When using your own data, observe the following recommended values.
| Item | Recommended value |
|---|---|
| Map data | 5 km square |
| OD data | 1,000 or less |
| Number of stations | Within 50 locations |
Data retention period
-
When you run a simulation, the simulation results and the data used for the simulation are saved.
-
The retention period for simulation results and for data used in the simulation is 24 hours. After 24 hours, the data will be deleted sequentially.
Maximum upload capacity
- Files of up to 100MB/file can be registered as simulation data.